# RFID glossary: tags, readers, UHF, NFC, EPC and more

This glossary defines the core terms of RFID in plain language: tags, readers, antennas, UHF, HF and NFC, EPC, middleware and more. Each entry has its own link so you can cite it, and entries based on a standard name the standard. Terms are grouped by how an RFID system is built.

## What are RFID tags and chips?

- **RFID tag** - A small device that stores an ID and replies to an RFID reader. It is attached to an item, such as a product, an asset or a card, so the item can be identified without a direct line of sight. Also called: transponder, RFID label. [Read more: How RFID works](https://cyphra.ps/en/solutions/rfid/how-it-works)
- **Inlay** - The thin layer inside a tag that holds the chip and the antenna together. Labels, cards and hard tags are made by wrapping an inlay in paper, plastic or another housing.
- **Passive tag** - A tag with no battery of its own. It takes all of its operating energy from the reader's radio signal, so it needs no charging. Source: [GS1 EPC Gen2 UHF RFID Standard, Release 3.0.1](https://ref.gs1.org/standards/gen2/), 2026.
- **Active tag** - A tag with its own power source, usually a battery, that can transmit by itself. It is typically used to track vehicles and containers rather than to label every item.
- **On-metal tag** - A tag designed to work when fixed to metal, which can detune or block an ordinary tag. It uses a spacer or a special antenna design, so tags for tools, equipment and metal racks are chosen for the surface they sit on. [Read more: Assets & Access](https://cyphra.ps/en/solutions/rfid/assets-access)
- **EPC memory** - The part of a Gen2 tag's memory that stores its Electronic Product Code, the ID the reader reports. The GS1 Tag Data Standard specifies how the contents of this memory bank are encoded. Source: [GS1 EPC Tag Data Standard, Release 2.3](https://ref.gs1.org/standards/tds/), 2025.

## What do readers and antennas do?

- **RFID reader** - A device that sends a radio signal, listens for tag replies and passes the IDs it hears to software. It is the part that wakes a passive tag and collects its answer. Also called: interrogator. Source: [GS1 EPC Gen2 UHF RFID Standard, Release 3.0.1](https://ref.gs1.org/standards/gen2/), 2026. [Read more: How RFID works](https://cyphra.ps/en/solutions/rfid/how-it-works)
- **Antenna** - The part that sends the reader's radio signal out and picks the tags' replies up. Where antennas are placed and which way they point decide which tags a reader can hear.
- **Read zone** - The area around an antenna where a reader can hear tags. It depends on the tag, the reader, the antenna and the surroundings, so it is tested on site rather than assumed. Also called: read field.
- **Portal** - A fixed frame or gate with antennas set around a door, dock or lane. It reads every tagged item that passes through, without anyone scanning. [Read more: Warehouse & Logistics](https://cyphra.ps/en/solutions/rfid/warehouse-logistics)
- **Handheld reader** - A portable reader that a person carries to the items. It is used for stock counts and for searching for one specific item. [Read more: Retail & Apparel](https://cyphra.ps/en/solutions/rfid/retail-apparel)
- **Read range** - The distance at which a reader can still hear a tag. It changes with the frequency, the tag, the reader, the antenna and the item, so a quoted figure is only a guide until it is tested on your items. [Read more: How RFID works](https://cyphra.ps/en/solutions/rfid/how-it-works)

## Which frequencies and standards matter?

- **Ultra high frequency (UHF)** - The radio band, 860 MHz to 930 MHz in the GS1 Gen2 standard, used by RFID systems that read many tags at a distance. It suits stock counts and doors. Source: [GS1 EPC Gen2 UHF RFID Standard, Release 3.0.1](https://ref.gs1.org/standards/gen2/), 2026. [Read more: How RFID works](https://cyphra.ps/en/solutions/rfid/how-it-works)
- **High frequency (HF)** - The RFID band at 13.56 MHz, used to read cards and tags held close to the reader. NFC works at the same base frequency. Source: [NFC Forum, NFC Technology: Technical Overview](https://nfc-forum.org/learn/nfc-technology/), 2026.
- **Near field communication (NFC)** - A contactless technology that works at 13.56 MHz over a very short distance, so a phone or card is tapped against the reader. It also lets a phone act as a contactless card. Source: [NFC Forum, NFC Technology: Technical Overview](https://nfc-forum.org/learn/nfc-technology/), 2026. [Read more: How RFID works](https://cyphra.ps/en/solutions/rfid/how-it-works)
- **Low frequency (LF)** - The lowest of the RFID radio bands. It reads over a very short distance and is mostly found in older access cards and animal identification, not in item-level stock counting.
- **Electronic Product Code (EPC)** - A standard format for the ID stored in a tag's memory, so any system can read what the number means. The GS1 Tag Data Standard defines the Electronic Product Code and the memory contents of Gen2 tags. Source: [GS1 EPC Tag Data Standard, Release 2.3](https://ref.gs1.org/standards/tds/), 2025.
- **EPC Gen2** - The GS1 standard for how UHF readers and tags communicate over the air, in the 860 MHz to 930 MHz range. Its full title is the EPC Radio-Frequency Identity Generation-2 UHF RFID Standard. Also called: Gen 2. Source: [GS1 EPC Gen2 UHF RFID Standard, Release 3.0.1](https://ref.gs1.org/standards/gen2/), 2026.
- **GS1** - A global standards organization that publishes the EPC Gen2 UHF, EPC Tag Data Standard and EPCIS specifications used in item-level RFID. Source: [GS1 EPC Tag Data Standard, Release 2.3](https://ref.gs1.org/standards/tds/), 2025.

## How does RFID data reach your business systems?

- **RFID middleware** - Software that sits between the readers and your business system. It filters duplicate and stray reads and forwards clean events, such as which item moved. [Read more: RFID + ERP/POS](https://cyphra.ps/en/solutions/rfid/erp-pos)
- **EPC Information Services (EPCIS)** - A GS1 standard that lets different applications create and share visibility event data, within and across companies. Not every ERP reads it directly, so middleware is usually the translation step. Source: [GS1 EPCIS Standard, Release 2.0](https://ref.gs1.org/standards/epcis/), 2022. [Read more: RFID + ERP/POS](https://cyphra.ps/en/solutions/rfid/erp-pos)
- **Enterprise resource planning (ERP)** - The business system that holds a company's stock, purchasing, sales and accounting records. RFID supplies counts to it, so quantities stay accurate without manual re-entry. [Read more: RFID + ERP/POS](https://cyphra.ps/en/solutions/rfid/erp-pos)
- **Point of sale (POS)** - The till or counter system that records each sale and updates the item record. Connected to the ERP, it keeps stock figures in step with what was sold. [Read more: RFID + ERP/POS](https://cyphra.ps/en/solutions/rfid/erp-pos)
- **Stocktake** - A count of the items actually on hand, checked against the system's records. With RFID a reader can hear many tagged items in one pass instead of scanning them one by one. Also called: inventory count, stock count. [Read more: Gold & Jewelry](https://cyphra.ps/en/solutions/rfid/gold-jewelry)
- **ZATCA e-invoicing (ZATCA)** - The e-invoicing (Fatoorah) program of the Zakat, Tax and Customs Authority in Saudi Arabia, which moves invoices into a structured electronic format. Cyphra's ERP and POS handle ZATCA e-invoicing, while RFID updates stock and is not itself a ZATCA system. Source: [ZATCA, E-Invoicing (Fatoorah) page](https://zatca.gov.sa/en/E-Invoicing/Pages/default.aspx), 2026. [Read more: RFID + ERP/POS](https://cyphra.ps/en/solutions/rfid/erp-pos)

## Sources

- [GS1 EPC Gen2 UHF RFID Standard, Release 3.0.1, 2026](https://ref.gs1.org/standards/gen2/)
- [GS1 EPC Tag Data Standard, Release 2.3, 2025](https://ref.gs1.org/standards/tds/)
- [NFC Forum, NFC Technology: Technical Overview, 2026](https://nfc-forum.org/learn/nfc-technology/)
- [GS1 EPCIS Standard, Release 2.0, 2022](https://ref.gs1.org/standards/epcis/)
- [ZATCA, E-Invoicing (Fatoorah) page, 2026](https://zatca.gov.sa/en/E-Invoicing/Pages/default.aspx)
