RFID for jewelry stores: stocktake without handling every piece
With RFID, a jewelry store counts its stock by reading the tag on each piece with a handheld reader, instead of lifting and checking pieces one by one. Cyphra Tech supplies the tags and readers, builds the stocktake software, and connects it to your ERP and POS, so every count updates your stock records.
Illustrative imageResults from a gold & jewelry client
Measured in a jewelry store after the switch to RFID.
- Full stocktake
- Before2 hoursWith RFID3 minutes
- Count accuracy
- Before95–98%With RFID100%
- 2,200 items read wirelessly in one pass with a handheld RFID reader
- Reads through the glass showcase, up to 4 meters
- 10 missing or misplaced items found in the first count
- 2 staff hours saved on every full count
Source: Cyphra Tech project records, November 2026.
Small, metal pieces are hard to count

Small pieces and metal are hard to read
Rings, earrings and chains are small, and metal interferes with reading. Jewelry needs tags made for small metal pieces, fixed in the right place on the piece or on its price tag.

Glass showcases and trays hide the stock
Counting a showcase by hand means opening it and lifting pieces one by one. Readers have to be placed so that a whole tray or showcase is read without anyone handling each piece.

The daily count touches every piece
A closing count by hand takes staff time and lets mistakes in, so many stores count less often than they would like. Reading tags means nobody has to handle the pieces.

One missing piece goes unnoticed
A single ring or pair of earrings is small enough to disappear unnoticed, and a count by hand shows the gap late, if at all. Reading tags tells you exactly which piece is missing.

Tagging must not damage the piece
A tag must attach without scratching or marking the piece or changing how it looks, so we choose the tag and how it attaches for each category of piece.
Jewelry RFID tags in the showcase and on the tray

- Tag each piece when it enters stock, with a tag that suits its size and metal.
- Scan the tray or showcase with a handheld or fixed reader.
- Reconcile the tags read against the ERP or POS stock list.
- Report what is missing or misplaced and update the stock records.
What we deliver for a jewelry stocktake system
Hardware
Tags and readers for small and metal items
We supply tags suited to rings, chains and other metal pieces, and the handheld and fixed readers that read them in your showcases and back office.
Software
Stocktake software
Our software turns tag reads into counts by tray and showcase, and lists the differences against your stock records.
Integration
Connection to your ERP and POS
We connect the stocktake to your ERP and POS system so every count updates your stock records without re-typing. Goldi is our own system for jewelry stores: goldi.jewelry.
Turnkey
One team from survey to support
We run the project end to end: site survey, proof of concept, installation, training and support.
What we take care of in a jewelry store
| Item | What we do | Why it matters |
|---|---|---|
| Tags | Chosen for your pieces, including small and metal ones, and tested on a sample before roll-out | Metal and very small pieces weaken reading, so the tag must suit the piece. |
| Reader type | Handheld reader, or a fixed reader at a showcase or counter | A handheld suits counts and spot checks; a fixed reader watches a showcase without staff effort. |
| ERP and POS integration | Stock counts written to your existing ERP or POS | Differences become stock updates without re-typing. |
| Regulatory compliance | Equipment approved for use in your country | Rules differ between countries, so equipment is chosen for the country where it runs. |
How a Cyphra RFID project runs
Frequently asked questions about RFID for jewelry stores
How do I track gold and jewelry inventory with RFID tags in a jewelry store?
You tag each piece and read the tags with a reader instead of counting by hand. Each tag carries a unique code, the stocktake software matches the codes it reads to your stock list, and any piece that is missing or misplaced shows up as a difference.
How much does an RFID system cost for a jewelry shop?
The cost depends on how many pieces you tag, which readers you need and how the system connects to your ERP or POS. Cyphra Tech quotes once we know your piece types and showcases. The return depends on how much time counting takes today and how many stock differences you find.
Can RFID inventory integrate with my existing ERP and POS system?
Yes, in most cases. RFID counts can be written to your existing ERP and POS so each count updates your stock records, and we map the systems RFID has to connect to during the site survey. See how RFID connects to ERP and POS.
Does RFID work with ZATCA e-invoicing for jewelry stores?
RFID is not itself a ZATCA system: it updates your stock, while Cyphra's ERP and POS handle ZATCA e-invoicing. The RFID count feeds your stock records, and invoicing continues through the ERP and POS.
Do RFID tags work on small pieces and metal jewelry?
Yes, with the right tag. Standard tags read poorly on metal and on very small items, so jewelry uses tags made for small metal pieces, attached to the piece or to its price tag. We confirm the choice on a sample of your pieces before roll-out.
Can RFID read pieces inside a glass showcase?
Yes. Radio signals pass through glass, so a reader at the showcase can read the tagged pieces inside without opening it. Metal shelves and trays affect reading, so we plan where the reader goes for each showcase.
How long does a jewelry stocktake take with RFID?
It is usually much faster than a manual count, but the time depends on how many pieces you hold and how they are laid out. In a 2009 retail study, scanning 10,000 items took 2 hours with RFID and 53 hours with a barcode reader. Those items were denim, not jewelry.
Talk to us about RFID for your business
Tell us your industry and the items you need to track. We reply with the tags and readers that fit.

